THIS SUPPRESSOR COMES WITH A RED WIPE INSTALLED BEHIND THE END CAP. DO NOT SHOOT HOLLOW POINT OR EXPANDING AMMO UNLESS THIS WIPE IS REMOVED FIRST!!! WHEN USING THE WIPE IN ANY CONFIGURATION, ONLY SHOOT FULL METAL JACKET AMMO (FMJ)!!!

The SEG H represents the evolution of many unique development cycles to find the intersection of suppression, simplicity and economy. Configurable into one of three lengths, no special tools needed for maintenance or reconfiguration. A common 15/16" wrench or socket is all that is needed. Built from hardened 17-4 Stainless Steel (190KSI tensile strength) and 7075 Aluminum, it can take a hell of a beating. Did we mention quiet? In its full length configuration it is impressively quiet across the full range of 9mm and even subsonic rifle cartridges like the 300 Blackout.

Why segments? Mission Configuration of course!

The primary segment is engraved at the very back giving it maximum survivability in the event of a baffle strike or other failure. The first baffle is hardened 17-4 stainless steel as these baffles take the brunt of the high velocity gasses and abrasion from carbon. These stainless steel baffles protect the aluminum baffles that follow them. With proper service and baffle rotations, the SEG H suppressor with provide a lifetime of hearing protection. A 100% no-fault lifetime warranty comes standard, as with all of our products.

For best and critical suppression, use the shortest barrel available with subsonic velocity 9mm FMJ, NO HOLLOW POINTS WITH THE WIPE INSTALLED!!!. Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar) on all internal parts before reassembly. The wipe can easily be replaced as a repair item by you or a gunsmith.

According to current BATFE guidance, repairing the wipe by direct replacement is allowed but making and keeping spares is NOT! Contact your legal counsel and or the NFA branch of BATFE for more information. We do not sell replacement wipes.

Configurations and specs:

Key features:

• ONE TAX STAMP... MANY CONFIGURATIONS!
  
• Rated for: 9mm, 300 blackout subsonic, 380ACP, 32ACP, 25ACP, 22LR, 22WMR, 17HMR, 17WSM, 5.7x28 (no barrel length restrictions)
• Comes with 1/2-28 Piston
• Hardened 17-4 SS Primary Baffle, Piston Cage and Piston (hardened to 190,000 PSI tensile strength) takes all the extreme abrasion and high pressures
• Baffles seal to each other to minimize carbon buildup in the segments (easy disassembly for cleaning)
• Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T65 and Punch 3427A26)
• OPTIONAL FIXED BARREL KIT
• New replacement parts available
  
• Full Auto rated
• Easy to service and reconfigure
• Easy to own
• 100% no-fault warranty, valid across the known universe and until the end of time
• Won't break the bank!

INSTRUCTIONS & CONFIGURATIONS

Sound Pressure Levels (measured 1M left of muzzle and 1.6M above ground):

FIND A CLASS 3 DEALER IN YOUR AREA

ALL NFA RULES APPLY.

To place an order, you must live in the USA in a state that allows ownership of silencers and you must be legally allowed to possess firearms. This item is restricted and can only ship to Class 3 FFL dealers. To best speed your order processing, please have your Class 3 FFL email us their FFL and current SOT before or soon after you order.