The COV was born of the innovative SEG. Developed as a tiny suppressor to carry and deploy discreetly. Don't let size fool you! The COV is a tough little MF. A common 3/4" wrench or socket is all that is needed. Built from hardened 17-4 Stainless Steel ( 190KSI tensile strength) and 7075 Aluminum, it can take a hell of a beating. Impressively quiet for its size, the COV can be easily concealed even attached to the host pistol. This suppressor is designed for maximum suppression via the Cap Wipe and ablative gel. This combination makes for an extremely quite suppressor for its very small size! It can be shot dry, with or without the wipe. But for maximum performance use a new Cap Wipe and fresh ablative gel. Together with a closed chamber, the Cap Wipe seals in the ablative gel so that it is ready when you are without leaking or drying out!
For best and critical suppression, use the shortest barrel available with standard velocity 22LR. Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar) on all internal parts before reassembly. The wipe can easily be replaced as a repair item by you or a gunsmith.
According to current BATFE guidance, repairing the wipe by direct replacement is allowed but making and keeping spares is NOT! Contact your legal counsel and or the NFA branch of BATFE for more information. We do not sell replacement wipes.
The first baffle is hardened 17-4 stainless steel and takes the brunt of the high velocity gasses and abrasion from carbon. This stainless steel baffle protects the aluminum baffle that follows. With proper use and service, the SEG will last a lifetime. Our lifetime, no-fault warranty comes standard, as with all of our products.
Key features:
Rated for: 22LR Round Nose ONLY (no barrel length restrictions)
Length: 2.4"
Weight: 2.2oz
Diameter: 0.97"
Hardened 17-4 SS Primary Baffle and Mount (hardened to 190,000 PSI tensile strength) takes all the extreme abrasion and high pressures
Baffles seal to each other to minimize carbon buildup in the segments (easy disassembly for cleaning)
Designed for use with ablative gel (water, non-toxic wire pull gel lubricant or petroleum jelly)
Repairable High-Strength High-Temperature Silicone Rubber Cap Wipe (McMaster-Carr item 5787T63 and Punch 3427a17)
Easy to service
Easy to own
100% no-fault warranty, valid across the known universe and until the end of time
Won't break the bank
Sound Pressure Level ***
This suppressor is designed for maximum suppression via ablative gel and a cap wipe. All SPL measurements are recorded with fresh ablative gel applied and a new cap wipe for each set of 5 shots. All shots are listed along with the average.
To place an order, you must live in the USA in a state that allows ownership of silencers and you must be legally allowed to possess firearms. This item is restricted and can only ship to Class 3 FFL dealers. To best speed your order processing, please have your Class 3 FFL email us their FFL and current SOT before or soon after you order.
THIS ITEM DOES NOT SHIP DIRECTLY TO YOU. THIS ITEM CANNOT BE EXPORTED.
YOU MUST LIVE IN A US STATE THAT ALLOWS OWNERSHIP OF SILENCERS!
